
How to Select a Drone Propulsion System: Motor, ESC, Propeller
How to size an integrated drone propulsion system: per-axis thrust, propeller and wheelbase, battery voltage, PWM/CAN and protection, with SIYI E3, D6, E6 and E8 compared.
Propulsion System · UAV Propulsion Kit
Motor, FOC ESC and 24 × 9.0 folding propeller, 12.5 kg max thrust per axis at sea level

E6 is an integrated propulsion system with a 155 KV motor, an FOC ESC and a 24 × 9.0 foldable propeller that installs on the drone arm as one unit. Maximum thrust is 12.5 kg per axis and the recommended take-off weight is 3–6 kg per axis, both at sea level, with a 12–14S LiPo battery recommended. It is rated IPX6, takes PWM and CAN throttle, and suits enterprise and agricultural drones.

Recommended take-off weight is 3–6 kg per axis at sea level and the recommended battery is 12–14S LiPo. Efficiency is stated as up to 7 g/W.
The foldable propeller is carbon fiber nylon composite and weighs 109.6 g; the motor has a 62 × 18 mm stator. The unit mounts on the drone arm, with a Φ30 mm tube diameter.
Max operating current is 70 A with a 120 A peak. PWM (5 V / 3.3 V compatible, 1050–1950 μs) and CAN throttle back each other up, and PWM takes priority over CAN.
The system comes integrated, so there are no separate components to assemble. It only needs to be fitted to the drone arm and is quick to mount and remove.
Rated IPX6 for work in rain and pesticide spray, with a fully glue-sealed ESC and motor wire that withstands up to 200 ℃. Tested with 1000 h+ of laboratory ageing and 200 h of flight ageing.
Operating data is saved inside the ESC. Adding the optional CAN LINK module lets users upgrade firmware, adjust ESC parameters, watch live data and review historical and fault records.
| Maximum Thrust (Single-axis) | Maximum thrust 12.5kg (at sea level) |
|---|---|
| Recommended Takeoff Weight (Single-axis) | Recommended takeoff weight 3-6kg (at sea level) |
| Recommended Battery | 12-14S (LiPo) |
| Signal Protocol | CAN/PWM (Compatible with 5V/3.3V) |
| Tube Diameter | Φ30mm |
| Weight (Excluding Propeller) | 825g (with propellers)Label and value disagree in the source; pending confirmation with the manufacturer |
| Ingress Protection | IPX6 |
| Operating Temperature Range | -20~50℃ |
| Driven Model | FOC |
|---|---|
| Throttle Pulse Width | 1050-1950us (Fixed throttle) |
| Max. Operation Current | 70A |
| Max. Current | 120A peak |
| Communication Protocol | CAN |
| KV | 155KV |
|---|---|
| Stator Size | 62*18mm |
| Diameter | 24mmUnit as published by SIYI; pending confirmation with the manufacturer |
|---|---|
| Pitch | 9.0mmUnit as published by SIYI; pending confirmation with the manufacturer |
| Propeller | Foldable propeller |
| Material | Carbon fiber nylon composite |
| Weight | 109.6g |
Package Dimensions: L197 * W197 * H85 mm · Weight: 834 g
Package Dimensions: L331 * W133 * H27 mm · Weight: 177 g
Item names as listed by SIYI. Contents can vary by combo.
Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website
Based on the reference configurations and case studies SIYI has published that use this product.
SIYI reference configurations that include this product.
Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.
The ESC gives priority to the PWM signal, then to CAN.
The CAN signal wire goes to a CAN hub module, which joins the bus to the flight controller's CAN port. The hub module has to be self-made or obtained from a third party.
Use the same rotation direction for the upper and lower units. Propellers go on normally on the upper unit; on the lower unit they are flipped over and refitted to the propeller mount.
Firmware upgrades are done in UniGCS or through an open-source flight controller.
Both are set in UniGCS on a computer, with the propulsion system's CAN cable plugged into the SIYI CAN LINK module.
A folding propeller without impact damage is good for 1000 hours of use, after which the blade washers must be replaced.

How to size an integrated drone propulsion system: per-axis thrust, propeller and wheelbase, battery voltage, PWM/CAN and protection, with SIYI E3, D6, E6 and E8 compared.

On 22 July 2025 a 10 L hexacopter with SIYI's E6 propulsion system sprayed 1.42 ha of rice in Huizhou, Guangdong, at 37°C and 78% humidity. Results as SIYI reports them.

Propulsion System
Motor, 80 A FOC ESC and 32 × 12.0-inch folding propeller with 18.5 kg max thrust per axis

Propulsion System
Factory-tuned 3510 motor, 40 A FOC ESC and 15.5-inch folding propeller for 6S drones

Propulsion System
Motor and FOC ESC for 22-inch straight or folding propellers, 6.5 kg max thrust per axis

Propulsion System
Module for upgrading propulsion firmware and tuning ESC parameters from a computer
Send us your requirements for more information, a quotation or advice on choosing a configuration.