Propulsion System · UAV Propulsion Kit

E8 Heavy-Lift UAV Propulsion System

Motor, 80 A FOC ESC and 32 × 12.0-inch folding propeller with 18.5 kg max thrust per axis

E8 Heavy-Lift UAV Propulsion System

Overview

E8 is an integrated propulsion system for heavy-lift drones: a motor with a KV of 110 rpm/V, an 80 A FOC ESC and a 32 × 12.0-inch folding propeller. Maximum thrust is 18.5 kg per axis, with a recommended take-off weight of 5–8 kg per axis, for wheelbases of 1200 mm or more and a φ40 mm tube diameter. It takes PWM or CAN throttle, supports DroneCAN and is compatible with ArduPilot and PX4.

  • Max thrust 18.5 kg/axis
  • Recommended take-off 5–8 kg/axis
  • φ40 mm tube, 12–14S LiPo
E8 — Propulsion System

Key features

  • 18.5 kg max thrust per axis

    Recommended take-off weight is 5–8 kg per axis, with a 12–14S LiPo battery recommended. Single-axis thrust efficiency is 10.0–8.0 g/W, and the system weighs 960 g without the propeller.

  • 32 × 12.0-inch propeller, KV 110 rpm/V motor

    For wheelbases of 1200 mm or more and a φ40 mm tube diameter. The 36N40P motor has an 81 × 18 mm stator, and each outer rotor is dynamically balanced to reduce vibration.

  • 80 A FOC ESC with redundant PWM and CAN throttle

    Operating current is 80 A with good heat dissipation, peak current 150 A for 3 s and max operating voltage 63 V. PWM (3.3/5 V, 1050–1950 μs, 50–500 Hz) and CAN throttle are redundant, with signal isolation.

  • Cooling built for sustained output

    The ESC's planar heat sink with large fins uses propeller downwash for cooling; SIYI cites core temperatures 20 ℃ lower than stacked designs. The motor uses 200 ℃ heat-resistant wire and N48SH magnets.

  • IP6X ingress protection with potted ESC

    The ESC is fully potted and the mesh motor base filters particles from the intake air. Validation includes a 1000-hour endurance test and a 48-hour salt spray test.

  • Self-check, fault logging and UniGCS tuning

    A power-on check covers seven parameters, among them voltage, throttle status and motor phases. Runtime, power cycles and past fault codes are logged, and tuning and firmware updates run in UniGCS.

Technical specifications

General Specifications12
E8 — General Specifications
Maximum Thrust (Single-axis)18.5 kg (Single-axis)
Recommended Takeoff Weight (Single-axis)5-8 kg (Single-axis)
Recommended Battery12-14S LiPo
Cable LengthPower Cable: 1000 mm, Signal Cable: 1100 mm
Single-Axis Thrust Efficiency10.0-8.0 g/w
Compatible Drone Wheelbase≥1200mm
Signal ProtocolPWM/CAN
Tube Diameterφ40 mm
Weight (Excluding Propeller)960g
Rated Input Power1042 w
Ingress ProtectionIP6XOther SIYI material states IPX6; pending confirmation with the manufacturer
Rated Output Power908 w
ESC Specifications10
E8 — ESC Specifications
Driven Model80A FOC
PWM Input Voltage3.3/5 V
Throttle Pulse Width1050-1950 μs
PWM Frequency50-500 HZ
Max. Operating Voltage63 V
Operation Current80 A (Excellent Heat Dissipation)
Max. Current150 A (Peak Current 3s)
Communication ProtocolCAN
Firmware UpgradeSupport
Digital ThrottleCAN
Motor Specifications4
E8 — Motor Specifications
KV110 rmp/v
Stator Size81*18 mm
Slot-Pole Configuration36N40P
Weight526 g
Propeller Specifications2
E8 — Propeller Specifications
Diameter32*12.0"
Pitch240 gThe source gives a weight in this row; pending confirmation with the manufacturer
In the box
  • E8 Propulsion System x1
  • E8 Foldable Propeller x1
  • Hex Socket Head Cap Screw M4 x 12 x4
  • Hook and Loop Propeller Retention Strap x1

Item names as listed by SIYI. Contents can vary by combo.

Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website

Where it is used

Based on the reference configurations and case studies SIYI has published that use this product.

Recommended solutions

SIYI reference configurations that include this product.

Downloads — E8

Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.

SIYI download page

View in catalogue: SIYI Product Brochure 2026/09 — page 29

Articles and case studies featuring E8

E6 Integrated Commercial UAV Propulsion System

Propulsion System

E6

Motor, FOC ESC and 24 × 9.0 folding propeller, 12.5 kg max thrust per axis at sea level

  • Max thrust 12.5 kg/axis (sea level)
  • Recommended take-off 3–6 kg/axis
  • Φ30 mm tube, 12–14S LiPo
E3 FOC Propulsion System for 600–700 mm Wheelbase UAVsNew

Propulsion System

E3

Factory-tuned 3510 motor, 40 A FOC ESC and 15.5-inch folding propeller for 6S drones

  • Max thrust 2.2 kg/axis (16 A)
  • Recommended take-off 0.5–1 kg/axis
  • 600–700 mm wheelbase, 6S
D6 Multirotor Propulsion System

Propulsion System

D6

Motor and FOC ESC for 22-inch straight or folding propellers, 6.5 kg max thrust per axis

  • Max thrust 6.5 kg/axis
  • Recommended take-off 2–2.5 kg/axis
  • 30 mm tube, 12–14S LiPo
CAN LINK Propulsion Tuning Module

Propulsion System

CAN LINK

Module for upgrading propulsion firmware and tuning ESC parameters from a computer

  • ESC firmware upgrade
  • ESC parameter adjustment
  • Real-time and historical data

Interested in E8?

Send us your requirements for more information, a quotation or advice on choosing a configuration.

Search the site

e.g. ZT30, thermal camera, inspection drone, RTK