
UAV Flight Controller Guide: Choosing an Autopilot, GNSS and RTK
What to compare when choosing a UAV flight controller: processor, sensor redundancy, interfaces and vehicle support, plus SIYI GNSS and RTK positioning modules.
Autopilot · GNSS / RTK
ZED-F9P RTK module usable as mobile station or base station, with dual-module heading

F9P RTK is a positioning module for flight control systems, based on the 184-channel u-blox ZED-F9P receiver for GPS, GLONASS, BeiDou and Galileo on multiple frequencies. Positioning accuracy is 1 cm + 1 ppm. The same hardware serves as mobile or base station, depending on the parameters and antenna used, and two mobile stations give heading in place of a compass. It works with PX4 and ArduPilot.

Receives GPS L1C/A and L2C, GLONASS L1OF and L2OF, Galileo E1B/C and E5b, BeiDou B1I and B2I, and QZSS L1C/A and L2C.
Single-point positioning is 1.5 m CEP and SBAS-aided positioning 1.0 m CEP. RTK surveying time is under 55 s; acquisition takes under 23 s from a cold start and under 1 s from a hot start.
Two RTK mobile stations give heading in place of a compass, useful where electromagnetic conditions are complex, as in power inspection. Orientation accuracy is (0.25 / R)°; R is the antenna spacing in meters.
The role is switched by loading different configuration parameters and fitting the matching antenna. Antenna gain is 2 dBi for the mobile station and 5.5 dBi for the base station.
The module carries an IST8310 compass and connects through 2 x UART and 1 x USB Type-C, with an MMCX antenna connector.
Runs on 4.5–5.5 V and operates from -30 to 75 °C. The mobile unit ships with a BT-560 GNSS antenna and the base station unit with a BT-800D mushroom GNSS antenna.
| Satellite Receiver | 184 channel ZED-F9P (Ublox) |
|---|---|
| Electronic Compass | IST8310 |
| Satellite Navigation System | GPS GLONASS Beidou Galileo |
| Satellite Bands | GPS-L1C/A, GPS - L2C, GLONASS - L1OF, GLONASS- L2OF GALILEO - E1B/C, GALILEO- E5b BeiDou - B1I, BeiDou - B2I QZSS - L1C/A, QZSS - L2C |
| Positioning Accuracy | 1 cm + 1 ppm |
|---|---|
| Orientation Accuracy (Dual Antenna) | (0.25 / R) ° *R is the distance between two mobile station antennas in meters. |
| Single Point Positioning | 1.5M CEP |
| SBAS Auxiliary Position | 1.0M CEP |
| Surveying Time | RTK < 55 s |
| Acquisition Time | Cold Start < 23 s Hot Start < 1 s |
| Antenna Gain | Mobile: 2 dBi Base: 5.5 dBi |
| Dual Module Direction Finding | Supported Yaw Accuracy: 0.35 deg (for reference) |
| Interfaces | 2 x UART 1 x USB (Type-C) |
| Antenna Connector Type | MMCX |
| Working Voltage | 4.5 ~ 5.5 V |
| Power Consumption | 0.6 W |
| Working Temperature | –30 ~ 75 °C |
| Product Dimension | 47 x 33 x 13 mm |
| Product Weight | 31 g |
F9P RTK Mobile Unit
F9P RTK Base Station Unit
Item names as listed by SIYI. Contents can vary by combo.
Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website
Based on the reference configurations and case studies SIYI has published that use this product.
Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.

What to compare when choosing a UAV flight controller: processor, sensor redundancy, interfaces and vehicle support, plus SIYI GNSS and RTK positioning modules.

SIYI's integration exercise puts the N7 autopilot, UniRC 7 and A8 mini on a tracked inspection UGV running ArduPilot Rover: set-up, steps and what carries over from drones.

Autopilot
Single-module, dual-antenna multi-frequency RTK receiver with a PNI RM3100 compass

Autopilot
u-blox M10 GNSS module on DroneCAN with compass, status light, buzzer and safety switch

Autopilot
GNSS module with IST8310 magnetometer, RGB status indicator, buzzer and safety switch

Autopilot
ArduPilot / PX4 autopilot with STM32H7, redundant dual IMUs and built-in shock absorption
Send us your requirements for more information, a quotation or advice on choosing a configuration.