Link & Controller · Datalink

2.4G Datalink Radio for Drone Data Communication

Data radio pair on 2400–2483 MHz linking the flight controller to the ground station

2.4G Datalink Radio for Drone Data Communication

Overview

SIYI 2.4G Datalink is a pair of data radios, a ground unit and an air unit, for industrial drone work such as aerial mapping. It operates at 2400–2483 MHz with a 325 kbps data rate. The air unit connects to PX4, ArduPilot or other UART flight controllers; the ground unit connects by UART or USB.

  • Frequency-hopping 2.4 GHz link
  • 2400–2483 MHz, 325 kbps
  • UART and USB ports, 5 V supply
2.4G Datalink — Link & Controller

Key features

  • Frequency hopping at low transmit power

    A low-power RF design combines a frequency-hopping algorithm with anti-interference technology. See the specification table for the range SIYI states and its conditions.

  • UART and USB ports

    The air unit connects to the flight controller over UART at 57600 or 115200 baud, with CAN as an option. The ground unit outputs data over UART or USB, and USB also serves for upgrades from a PC.

  • Works with PX4, ArduPilot and UART flight controllers

    Compatible with PX4 and ArduPilot flight controllers, or any flight controller with a UART port for transparent communication. The link carries data at 325 kbps.

  • Small 5 V units with SMA antennas

    The air unit measures 49*31*13.5 mm and weighs 28 g; the ground unit is 50*35*16 mm and 35 g without antenna. Both run on 5 V with 5 dBi rod antennas on SMA female connectors, from -10°C to 50°C.

Technical specifications

Overall5
2.4G Datalink — Overall
Max Transmission Range30 km
(Unobstructed, free of interference)Other SIYI material states 15 km; pending confirmation with the manufacturer
Frequency2400 ~ 2483 MHz
Datalink Compatible Flight ControllersPX4 / Ardupilot Flight Controllers or any flight controllers with UART port for transparent communication
Transmission Data Speed325 kbps
UART Baud Rate57600
115200
Ground Unit7
2.4G Datalink — Ground Unit
Data Output PortUART
USB
Dimensions50*35*16 mm (antenna excluded)
Weight35 g (antenna excluded)
Antenna Gain2.4G Rod Antenna: 5 dBi
Antenna ConnectorSMA Female
Working Temperature-10°C ~ 50°C
Working Voltage5 V
Air Unit7
2.4G Datalink — Air Unit
Interface & PortsUART
Dimensions49*31*13.5 mm
Weight28 g
Antenna Gain2.4G Rod Antenna: 5 dBi
Antenna ConnectorSMA Female
Working Voltage5 V
Working Temperature-10°C ~ 50°C

Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website

Downloads — 2.4G Datalink

Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.

SIYI download page

View in catalogue: SIYI Product Brochure 2026/09 — page 12

Frequently asked questions about 2.4G Datalink

Which connections do the ground unit and air unit support?

The ground unit connects over UART or USB, and the air unit over UART. A version with CAN is a custom variant; contact SIYI support about it.

Is the data port TTL or RS232?

The data port uses TTL levels.

Can two 2.4G Datalink sets operate side by side in one area?

No. The band is too narrow for two sets to work at the same time without interfering with each other.

How should the air unit and its antenna be installed?

Place the air unit's 2.4G antenna outside the airframe, and keep the SMA connector away from conductive parts of the drone. The omnidirectional antenna is strongest when vertical, so avoid pointing its tip at the aircraft in flight.

Can the ground unit be used with a mobile phone?

Yes, provided the phone supports OTG. Link the phone and the ground unit with an OTG cable, launch the ground station app and select USB Connect.

What is the default baud rate, and can it be changed?

The default is 115200. To change it, download the firmware built for the baud rate you need from the official SIYI website and upgrade the units.

Articles and case studies featuring 2.4G Datalink

HM30 Full HD Video Transmission System

Link & Controller

HM30

One link for Full HD video, telemetry and RC signals, with dual-operator support

  • Up to 20 km, unobstructed
  • 1080p video, 150 ms latency
  • Dual operator, two ground units
DK32S 16-Channel Remote Controller and Datalink

Link & Controller

DK32S

16-channel touchscreen remote controller with a built-in 2.4 GHz datalink

  • Up to 20 km, unobstructed
  • 16 channels, S.Bus and PWM output
  • 2.8-inch touchscreen, 12 h battery
UniRC 10 Pro Triple-Frequency Handheld Ground StationNew

Link & Controller

UniRC 10 Pro

10.1-inch 2000-nit ground station with triple-frequency link, dual batteries and air unit

  • 10.1-inch 1920 × 1200, 2000 nit
  • Triple-frequency, 2 bands at a time
  • 35–45 km over sea, low interference
UniRC 7 Series 7-inch Handheld Ground Stations

Link & Controller

UniRC 7 Series

7-inch 1600-nit ground stations: UniRC 7 (2.4 GHz) and UniRC 7 Pro (2.4 + 5.8 GHz)

  • 7-inch touchscreen, 1600 nit
  • 2.4 GHz; Pro adds 5.8 GHz
  • 30–40 km over sea, low interference

Interested in 2.4G Datalink?

Send us your requirements for more information, a quotation or advice on choosing a configuration.

Search the site

e.g. ZT30, thermal camera, inspection drone, RTK