
How to Select a Drone Propulsion System: Motor, ESC, Propeller
How to size an integrated drone propulsion system: per-axis thrust, propeller and wheelbase, battery voltage, PWM/CAN and protection, with SIYI E3, D6, E6 and E8 compared.
Propulsion System · UAV Propulsion Kit
Motor and FOC ESC for 22-inch straight or folding propellers, 6.5 kg max thrust per axis

D6 is an integrated multirotor propulsion system with a 130 KV motor and an FOC ESC developed by SIYI, used with 22-inch straight or foldable carbon fiber propellers. Maximum thrust is 6.5 kg per axis and the recommended take-off weight is 2 to 2.5 kg per axis, with a 12–14S LiPo battery recommended. It has a 30 mm tube diameter, an IPX5 rating and dual-redundant PWM and CAN throttle.

Recommended take-off weight is 2 to 2.5 kg per axis and the recommended battery is 12–14S LiPo. The system weighs 429 g without the propeller.
The carbon fiber propellers have a 7.8-inch pitch in the straight version and 9-inch in the foldable version. The 24N28P motor weighs 240 g, and the tube diameter is 30 mm.
Operating current is 23 A, max current 55 A and max operating voltage 60 V. PWM (3.3 / 5 V, 1100–1940 μs, 50–500 Hz) and CAN digital throttle are dual-redundant, with PWM taking priority.
The ESC uses nano-coating and the system is rated IPX5. The motor has a full CNC structure with high-temperature-resistant enameled wire, and the propeller blades are pure carbon fiber.
Built-in sensors record voltage, current, temperature and motor speed as the system runs. Engineers can read the records over the CAN bus when diagnosing faults and planning maintenance.
Connect the CAN cable to the SIYI CAN LINK module and a computer to view logs and set the light colour and CAN ID in UniGCS. Firmware upgrades run via UniGCS or an open-source flight controller.
| Maximum Thrust (Single-axis) | 6.5 kg |
|---|---|
| Recommended Takeoff Weight (Single-axis) | 2 to 2.5 kg |
| Recommended Battery | 12~14S LiPo |
| Cable Length | Power Cable: 710 mm Signal Cable: 780 mm |
| Tube Diameter | 30 mm |
| Weight (Excluding Propeller) | 429 g |
| Ingress Protection | IPX5 |
| Driven Model | FOC |
|---|---|
| PWM Input Voltage | 3.3 / 5 V |
| Throttle Pulse Width | 1100 ~ 1940 μs |
| PWM Frequency | 50 ~ 500 Hz |
| Max. Operating Voltage | 60 V |
| Operation Current | 23 A |
| Max. Current | 55 A |
| Communication Protocol | CAN |
| Firmware Upgrade | Supported |
| Digital Throttle | CAN |
| KV | 130 KV |
|---|---|
| Stator Size | Φ67.7 * 23.1 mm |
| Slot-Pole Configuration | 24N28P |
| Weight | 240 g |
| Diameter | 22inch |
|---|---|
| Pitch | 7.8inch (Straight Propeller) 9 inch (Foldable Propeller) |
| Propeller | Straight Propeller Foldable Propeller |
Package Dimensions: L199 * W164 * H73 mm · Package Weight: 515 g
Package Dimensions: L140 * W605 * H66 mm · Package Weight: 177 g
Package Dimensions: L140 * W605 * H66 mm · Package Weight: 193 g
Item names as listed by SIYI. Contents can vary by combo.
Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website
Based on the reference configurations and case studies SIYI has published that use this product.
SIYI reference configurations that include this product.
Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.
PWM runs on the black-and-white twisted pair. CAN uses the group of three wires coloured blue, red and yellow.
The ESC gives priority to the PWM signal, then to CAN.
The CAN signal wire goes to a CAN hub module, which joins the bus to the flight controller's CAN port. The hub module has to be self-made or obtained from a third party.
Use the same rotation direction for the upper and lower units. Propellers go on normally on the upper unit; on the lower unit they are flipped over and refitted to the propeller mount.
Firmware upgrades are done in UniGCS or through an open-source flight controller.
A folding propeller without impact damage is good for 1000 hours of use, after which the blade washers must be replaced.

How to size an integrated drone propulsion system: per-axis thrust, propeller and wheelbase, battery voltage, PWM/CAN and protection, with SIYI E3, D6, E6 and E8 compared.

Propulsion System
Motor, 80 A FOC ESC and 32 × 12.0-inch folding propeller with 18.5 kg max thrust per axis

Propulsion System
Motor, FOC ESC and 24 × 9.0 folding propeller, 12.5 kg max thrust per axis at sea level

Propulsion System
Factory-tuned 3510 motor, 40 A FOC ESC and 15.5-inch folding propeller for 6S drones

Propulsion System
Module for upgrading propulsion firmware and tuning ESC parameters from a computer
Send us your requirements for more information, a quotation or advice on choosing a configuration.