
UAV Flight Controller Guide: Choosing an Autopilot, GNSS and RTK
What to compare when choosing a UAV flight controller: processor, sensor redundancy, interfaces and vehicle support, plus SIYI GNSS and RTK positioning modules.
Autopilot · GNSS / RTK
u-blox M10 GNSS module on DroneCAN with compass, status light, buzzer and safety switch

UniGNSS M10 is a GNSS module that talks to the flight controller over DroneCAN. Its u-blox M10 receiver tracks BeiDou, GPS/QZSS, GLONASS and Galileo at once, with 1.5 m CEP horizontal accuracy. An IST8310 compass, RGB status light, buzzer and safety switch are built in, and LNA + SAW filtering suppresses electromagnetic noise. It supports ArduPilot and PX4 and is adapted for SIYI UniFC 6 PICO.

The module communicates over DroneCAN and supports ArduPilot and PX4, so it can be fitted to different vehicle types.
The UBX-M10050 receiver gives 1.5 m CEP horizontal accuracy. Acquisition takes 28 s from a cold start and 1 s from a hot or assisted start.
BeiDou, GPS/QZSS, GLONASS and Galileo are received together, keeping positioning steadier in cities and other complex surroundings. Data refreshes at up to 25 Hz on a single GNSS and up to 10 Hz with 3 or more.
The filter stage suppresses electromagnetic noise from motors, ESCs and 2.4G / 5.8G video transmission, improving resistance to interference.
An IST8310 compass is built in. The RGB light shows arming, positioning and fault states, and the safety switch prevents accidental arming during ground debugging and transport.
Runs on 4.5–5.5 V and operates from -30 to 60 ℃. The package includes a GPS mount with a 120 mm carbon fiber tube.
| Satellite Receiver | UBX-M10050 |
|---|---|
| Processor | STM32L431 |
| Electronic Compass | IST8310 |
| Satellite Bands | GPS L1 C/A QZSS L1 C/A, L1S GLONASS L1OF BeiDou B1I/B1C Galileo E1B/C SBAS L1 C/A |
| Positioning Accuracy | Horizontal: 1.5m CEP |
|---|---|
| Communication protocol | DroneCAN |
| Sensitivity | Tracking & Navigation: –167 dBm Reacquisition: –160 dBm Cold Start: –148 dBm Hot Start: –159 dBm |
| Acquisition Time | Cold start: 28s Assisted start: 1s Hot start: 1s |
| Data Refresh Rate | Up to 25 Hz (Single GNSS) Up to 10 Hz (≥3 concurrent GNSS) |
| Filtering | LNA+SAW |
| Working Voltage | 4.5 ~ 5.5 V |
| Working Temperature | -30 ~ 60 ℃ |
| Product Dimension | 50.6 x 50.6 x 13.6 mm |
| Product Weight | 31 g |
Dimensions (With Package): L145 * W120 * H32 mm · Weight (With Package): 75.9 g
Item names as listed by SIYI. Contents can vary by combo.
Specifications are taken from the SIYI website as of 18 November 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website
SIYI has not published a reference configuration that names this model. Products in the Autopilot line are used in solutions for these platforms.
Files are served by SIYI, as listed on 18 November 2026. Check the SIYI download page for the latest versions.

What to compare when choosing a UAV flight controller: processor, sensor redundancy, interfaces and vehicle support, plus SIYI GNSS and RTK positioning modules.

Autopilot
Single-module, dual-antenna multi-frequency RTK receiver with a PNI RM3100 compass

Autopilot
ZED-F9P RTK module usable as mobile station or base station, with dual-module heading

Autopilot
GNSS module with IST8310 magnetometer, RGB status indicator, buzzer and safety switch

Autopilot
ArduPilot / PX4 autopilot with STM32H7, redundant dual IMUs and built-in shock absorption
Send us your requirements for more information, a quotation or advice on choosing a configuration.