Link & Controller · Datalink

HM30 Full HD Video Transmission System

One link for Full HD video, telemetry and RC signals, with dual-operator support

HM30 Full HD Video Transmission System

Overview

HM30 is a digital link that carries 1080p Full HD video, telemetry and remote-control signals between an air unit and a ground unit, with a range of up to 20 km in unobstructed, interference-free conditions. Two ground units can link to one air unit, so one operator flies while the other runs the payload. It works with PX4, ArduPilot and INAV flight controllers.

  • Up to 20 km, unobstructed
  • 1080p video, 150 ms latency
  • Dual operator, two ground units
HM30 — Link & Controller

Key features

  • Video, telemetry and RC on one link

    A single link carries dual-channel Full HD video, the datalink and remote control. It adapts automatically to the frequency channel with the least interference; the stated latency is 150 ms.

  • Up to 20 km transmission range

    The 20 km maximum applies to unobstructed, interference-free conditions. The ground unit uses standard 5 dBi omni and 11 dBi long-range antennas, with an optional 5 dBi lollipop antenna.

  • Dual operator with two ground units

    Up to two ground units can link to the same air unit at once: one flies the aircraft, the other controls the gimbal camera or other payload. Each can view the same camera source or a different one.

  • Compact ground unit with OLED display

    The 0.96-inch OLED shows link status in real time and allows quick parameter setting in the field. The unit measures 109 x 61 x 28 mm, weighs 132 g and is rated IP53.

  • Quick-release battery, PD 30W fast charging

    The ground unit runs on NP-F550 / F750 / F950 series quick-release batteries with PD fast charging up to 30 W, or on an external battery through the XT30 input for long operations.

  • Air unit interfaces and power

    The 74 g air unit outputs 16 channels of S.Bus and 5 of PWM, with UART for the flight controller and a LAN port for video. It runs on 3S–6S (12.6–25.2 V); an optional power module accepts 4S–18S.

Technical specifications

Overall5
HM30 — Overall
Max Transmission Range20 km
(Unobstructed, free of interference)
Channels16 communication channels
Datalink Compatible Flight ControllersPX4 / ArduPilot Open-Source Flight Controllers:
SIYI N7, etc.
INAV Open-Source Flight Controllers
Video Stream Compatible GCS (Android)SIYI Factory Apps:
SIYI FPV
Open-Source GCS:
QgroundControl
Mission Planner
Video Stream Compatible GCS (Windows)Open-Source GCS:
QGroundControl
Mission Planner (H264 only)
Ground Unit9
HM30 — Ground Unit
Monitor0.96-inch OLED Display
Battery TypeNP-F550 / F750 / F950 Series Quick Release Batteries
(HM30 fly more combo comes with NP-750 quick release battery)
Fast Charging ProtocolPD 30W
Dimensions109 x 61 x 28 mm
Weight132 g
Antenna GainStandard Omni Antenna: 5 dBi
Standard Long Range Antenna: 11 dBi
(Optional) Lollipop Antenna: 5 dBi
Interface & PortsS.Bus / PPM RC Signal Input: RC (GH1.25 4-pin)
Datalink Output: UART (GH1.25 4-pin)
Ethernet Port: LAN (GH1.25 4-pin)
Power Output: VCC (GH1.25 4-pin, without bucket)
GCS Datalink Communication: Type-C
Firmware Upgrade: Type-C
Charge: Type-C
Power Input: PWR (XT30)
Tripod Connector: 1/4-inch Screw Hole
IP LevelIP53
Working Temperature-10 ~ 50℃
Air Unit8
HM30 — Air Unit
Signal Output16 channels of S.Bus
5 channels of PWM
Interface & PortsS.Bus RC Signal Output: S.Bus Out (GH1.25 3-Pin)
Datalink (to FC): UART (GH1.25 4-Pin)
PWM Channel 1 to 5: PWM (GH1.25 6-Pin)
Video Input / Network Communication: LAN (GH1.25 8-Pin)
Firmware Upgrade: Type-C
Dimensions70 x 55 x 16 mm (fan included)
WeightHM30 Air Unit:
74 g
HM30 Air Unit + 4S to 18S Power Module:
109 g
Antenna GainOmni Antenna: 5 dBi (Standard)
Lollipop Antenna: 5 dBi (Optional)
Working VoltageHM30 Air Unit
3S ~ 6S / 12.6 ~ 25.2 V
( Notice: The old version HM30 Air Unit only support 3S ~ 4S )
4S to 18S Power Module (Optional):
16.8 ~ 75.6 V
Working Temperature-10 ~ 50℃
Power ConsumptionHM30 Air Unit:
- Average: 2.8 W
- Peak: 12 W
HM30 Air Unit + 4S to 18S Power Module:
- Average: 3.2 W
- Peak: 12 W
R1M Recording FPV Camera (Optional, packed with both HM30 combos)13
HM30 — R1M Recording FPV Camera (Optional, packed with both HM30 combos)
Video Output PortEthernet
Image Sensor1/2.9 Inch, 2 MP
FOVDiagonal: 90°
Horizontal: 80°
Working Voltage12 V
Power Consumption2.5 W
Video Recording Resolution1080p (1920*1080) @ 30 fps
720p (1280*720) @ 30 fps
Recording Bitrate12 Mbps
Video Recording FormatMP4
Supported TF / SD Card TypeMicroSD Class10
Less than 32GB
File Storage FormatFAT32
Dimensions42 x 42 x 25 mm
Weight23 g
Working Temperature-10℃ ~ 50℃
Air Unit HDMI Input Converter (Optional, packed with MK32 / MK15 HDMI combo)12
HM30 — Air Unit HDMI Input Converter (Optional, packed with MK32 / MK15 HDMI combo)
Video InputMicro HDMI
Video OutputEthernet
Working Voltage12 V
Power Consumption3 W
Video Recording Resolution1080p (1920 × 1080) @ 30 fps
720p (1080 × 720) @ 30 fps720p frame size as published by SIYI; pending confirmation with the manufacturer
Video Storage Bitrate12 Mbps (H265 codec)
File Storage FormatFAT32
Video Recording FormatH265
Supported TF / SD Card TypeMicroSD Class10, Less than 32GB
Dimensions42*41*11 mm
Weight26 g
Working Temperature-10℃ ~ 50℃
Ethernet to HDMI Output Converter (Optional)12
HM30 — Ethernet to HDMI Output Converter (Optional)
Video Input PortEthernet
Video Output PortMicro-HDMI
Working Voltage8.4 ~ 25.2 V
Power ConsumptionAverage: 1.5 W
Peak: 5 W
Video Recording Resolution1080p (1920*1080) @ 30 fps
720p (1280*720) @ 30 fps
Video Recording Bitrate12 Mbps (H265 codec)
Supported File SystemFAT32
ExFAT
Video FormatMP4
Supported TF / SD Card TypeMicroSD Class10, max 128 GB
Dimensions42 x 37 x 13 mm
Weight25 g
Working Temperature-10 ~ 55℃
In the box

Packaging Dimensions: L211 * W153 * H70 mm · Packaging Weight: 1024 g

  • HM30 Packaging Box x1
  • HM30 Ground Unit x1
  • HM30 Air Unit x1
  • HM30 Omnidirectional Antenna x4
  • HM30 XT30 Female Connector Cable x1
  • HM30 GH1.25 3PIN to S.Bus Male Connector Cable x1
  • HM30 PWM Cable x1
  • HM30 Air Unit Data Cable x1
  • 5G Flat Panel Range Extension Antenna x2
  • HM30 GH1.25 4PIN to S.Bus Male Connector Cable x1
  • HM30 GH1.25 4PIN to Dupont Connector Cable x1
  • HM30 GH1.25 4PIN to RJ45 Ethernet Cable x1
  • PD Fast-Charging Cable (USB-C to USB-C) x1
  • Type-C to USB A Adapter x1
  • Type-C to Micro USB Data Cable x1
  • RIM Card HD Camera Assembly x1
  • NP-F550/570/950 2S Battery x1
  • 20W PD Power Adapter x1

Packaging Dimensions: L211 * W153 * H70 mm · Packaging Weight: 781 g

  • HM30 Packaging Box x1
  • HM30 Ground Unit x1
  • HM30 Air Unit x1
  • HM30 Omnidirectional Antenna x4
  • HM30 XT30 Female Connector Cable x1
  • HM30 GH1.25 3PIN to S.Bus Male Connector Cable x1
  • HM30 PWM Cable x1
  • HM30 Air Unit Data Cable x1
  • 5G Flat Panel Range Extension Antenna x2
  • HM30 GH1.25 4PIN to S.Bus Male Connector Cable x1
  • HM30 GH1.25 4PIN to Dupont Connector Cable x1
  • HM30 GH1.25 4PIN to RJ45 Ethernet Cable x1
  • PD Fast-Charging Cable (USB-C to USB-C) x1
  • Type-C to USB A Adapter x1
  • Type-C to Micro USB Data Cable x1
  • RIM Card HD Camera Assembly x1

Item names as listed by SIYI. Contents can vary by combo.

Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website

Where it is used

Based on the reference configurations and case studies SIYI has published that use this product.

Recommended solutions

SIYI reference configurations that include this product.

Frequently asked questions about HM30

How can the HM30 ground unit be powered?

There are two ways: from the quick-release battery mounted on the rear of the unit, or from an external 3S–6S battery through the XT30 connector.

What input voltage does the HM30 air unit accept?

The air unit accepts 3S–6S, or 12.6–25.2 V. Units shipped since 2024 support up to 6S, while early units support 3S–4S only.

How much bandwidth does the HM30 link provide?

The downlink is 8 Mbps and the uplink is 4 Mbps, measured at close range without interference.

Which telemetry connection methods does the HM30 support?

Four: Bluetooth, Type-C, UART and UDP. UDP telemetry is not available on firmware versions below 0.2.2.

What signal level does the HM30 UART port use?

The UART port uses TTL at a 3.3 V level.

How should the HM30 ground unit be charged?

Use the original PD fast charger; a 5 V charger cannot charge the ground unit. Switch the unit off before charging, since the quick-release battery is not charged while the unit is running.

Articles and case studies featuring HM30

DK32S 16-Channel Remote Controller and Datalink

Link & Controller

DK32S

16-channel touchscreen remote controller with a built-in 2.4 GHz datalink

  • Up to 20 km, unobstructed
  • 16 channels, S.Bus and PWM output
  • 2.8-inch touchscreen, 12 h battery
2.4G Datalink Radio for Drone Data Communication

Link & Controller

2.4G Datalink

Data radio pair on 2400–2483 MHz linking the flight controller to the ground station

  • Frequency-hopping 2.4 GHz link
  • 2400–2483 MHz, 325 kbps
  • UART and USB ports, 5 V supply
UniRC 10 Pro Triple-Frequency Handheld Ground StationNew

Link & Controller

UniRC 10 Pro

10.1-inch 2000-nit ground station with triple-frequency link, dual batteries and air unit

  • 10.1-inch 1920 × 1200, 2000 nit
  • Triple-frequency, 2 bands at a time
  • 35–45 km over sea, low interference
UniRC 7 Series 7-inch Handheld Ground Stations

Link & Controller

UniRC 7 Series

7-inch 1600-nit ground stations: UniRC 7 (2.4 GHz) and UniRC 7 Pro (2.4 + 5.8 GHz)

  • 7-inch touchscreen, 1600 nit
  • 2.4 GHz; Pro adds 5.8 GHz
  • 30–40 km over sea, low interference

Interested in HM30?

Send us your requirements for more information, a quotation or advice on choosing a configuration.

Search the site

e.g. ZT30, thermal camera, inspection drone, RTK