
How to Choose a UAV Gimbal Camera for Industrial Drone Work
What to check before choosing a UAV gimbal camera: sensors, zoom, stabilization, mounting, interfaces and protection, with six SIYI models compared from their specifications.
Gimbal Camera · Agricultural Monitoring Camera
Single-axis FPV gimbal camera with a 160° horizontal view for agricultural drones

A2 mini is a single-axis FPV gimbal camera made for agricultural drones. A 1/2.7-inch starlight CMOS sensor with 2 MP effective resolution gives a 1080p view across 160° horizontally, and the housing is designed to keep out water and pesticide and to be easy to clean. It runs on 12 V, weighs 85 g, outputs video over Ethernet and takes S.Bus, PWM or Ethernet UDP control.

The camera covers 160° horizontally, and distortion correction is applied to the ultra-wide image.
A 1/2.7-inch starlight CMOS sensor with 2 MP effective resolution holds a bright FPV picture in dim conditions.
The exterior is designed to protect the camera from water and pesticide during agricultural drone work, and to be easy to clean and maintain.
Stabilization and high-precision FOC control algorithms steady the single pitch axis, and the operator can set the tilt angle from -90° to 25°.
The gimbal switches to upside-down mode by itself when mounted inverted, which makes it easy to fit on UGVs, USVs, robotic dogs and other robots.
Video is output over Ethernet and control signals come in via S.Bus, PWM or Ethernet UDP. The camera runs on 12 V, drawing 2 W on average and 12 W at peak.
| Video Output Port | Ethernet |
|---|---|
| Control Signal Input Port | S.Bus, PWM Ethernet UDP |
| Working Voltage | 12V |
| Power Consumption | Average: 2 W Peak: 12 W |
| Working Temperature | -10°C ~ 50°C |
| Dimension | 65*43*50 mm |
| Weight | 85 g |
| Controllable Pitch Angle | -90° ~ 25° |
|---|
| FOV | Horizontal 160° |
|---|---|
| Image Sensor | 1/2.7 Inch, 2 MP effective resolution |
Package Dimensions: L140 * W85 * H67 mm · Package Weight: 177 g
Item names as listed by SIYI. Contents can vary by combo.
Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website
Based on the reference configurations and case studies SIYI has published that use this product.
SIYI reference configurations that include this product.
Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.
No. A2 mini is a single-axis gimbal, so only pitch can be controlled; the controllable pitch range is -90° to 25°.
It can be installed in upright mode, upside-down mode or nose mode. Upside-down mode is activated automatically when the gimbal is mounted inverted.
Control via channel 15 is not currently supported on the LAN2 port. Connect A2 mini to the LAN1 port of the UniRC7 air unit instead.
Yes. Connect the gimbal's network port to the computer directly, or place both on a network where they can reach each other.
The network port uses a GH connector with a 1.25 mm pitch.
Yes. Update the camera to the latest firmware from SIYI's official website, then change the address with SDK commands. If the new address is forgotten, the camera can be reached at the backup IP 192.168.100.254 to change or reset it.

What to check before choosing a UAV gimbal camera: sensors, zoom, stabilization, mounting, interfaces and protection, with six SIYI models compared from their specifications.

Gimbal Camera
Compact four-sensor pod with a built-in AI module, used in SIYI flagship configurations

Gimbal Camera
Zoom, thermal, wide-angle and laser rangefinder on one 3-axis stabilized gimbal

Gimbal Camera
4K visible-light and 640 × 512 thermal cameras on a compact 3-axis stabilized gimbal

Gimbal Camera
4K 3-axis gimbal camera with 30x optical zoom, 180x hybrid zoom and 540° yaw travel
Send us your requirements for more information, a quotation or advice on choosing a configuration.