Propulsion System · UAV Propulsion Kit

E3 FOC Propulsion System for 600–700 mm Wheelbase UAVs

Factory-tuned 3510 motor, 40 A FOC ESC and 15.5-inch folding propeller for 6S drones

E3 FOC Propulsion System for 600–700 mm Wheelbase UAVs

Overview

E3 is a factory-tuned propulsion set of a 3510 motor (KV 350 rpm/V), a 40 A FOC ESC and a 15.5-inch folding propeller for 6S drones with a 600–700 mm wheelbase. Maximum thrust is 2.2 kg per axis (16 A), the recommended take-off weight is 0.5–1 kg per axis, and single-axis thrust efficiency is 9.5 g/W. It takes PWM or CAN throttle, supports DroneCAN and works with ArduPilot and PX4.

  • Max thrust 2.2 kg/axis (16 A)
  • Recommended take-off 0.5–1 kg/axis
  • 600–700 mm wheelbase, 6S
E3 — Propulsion System

Key features

  • 2.2 kg max thrust per axis (16 A)

    Recommended take-off weight is 0.5–1 kg per axis and the recommended battery is 6S. Single-axis thrust efficiency is 9.5 g/W.

  • 15.5-inch folding propeller, KV 350 rpm/V motor

    For portable industrial and aerial cinematography drones with a 600–700 mm wheelbase. The carbon-plastic composite propeller has a 5.8 inch pitch, and the 12N14P motor uses a 35.1 mm × 10 mm stator.

  • 40 A FOC ESC with PWM and CAN dual control

    Max operating current is 40 A and max current 60 A on 6S LiPo, with a 220 ms throttle response time. If the primary throttle signal is lost, the system switches to the other input.

  • Motor build and materials

    Aluminum upper housing and a CNC-machined stator mount, with 0.2 mm silicon steel laminations, N48SH magnets and NMB bearings. The motor weighs 120 g ± 1 g.

  • IPX5, operating from -20 to 50 ℃

    Testing covered a 1000-hour continuous endurance run and 48 hours of salt spray. Before the propellers turn, the ESC checks voltage, signal and hardware at power-up.

  • Flight data logging and UniGCS setup

    Logs voltage, current, RPM, temperature and operating status for playback and fault tracing after a flight. Firmware updates and parameter adjustments are done in UniGCS.

Technical specifications

General Specifications8
E3 — General Specifications
Maximum Thrust (Single-axis)2.2 kg (16A)
Recommended Takeoff Weight (Single-axis)0.5~1 kg
Recommended Battery6 S
Single-Axis Thrust Efficiency9.5 g/w
Compatible Drone Wheelbase600 mm - 700 mm
Signal ProtocolCAN / PWM (5V / 3.3V Compatible)
Ingress ProtectionIPX5
Operating Temperature Range-20~50 ℃Other SIYI material states -30 to 60 ℃; pending confirmation with the manufacturer
ESC Specifications11
E3 — ESC Specifications
Driven ModelFOC
Throttle Pulse Width1050 μs - 1950 μs
Max. Operating Voltage6 S (LiPo)
Max. Operation Current40 A
Max. Current60 A
Throttle Response Time220 ms
Weight46.5 g ± 0.1 g
Power Cable16AWG*500 mm
Signal Cable28AWG*550 mm
Motor Phase Connectors3.5 mm Gold-Plated Bullet
ESC Dimensions65.35*26*11.5 mm
Motor Specifications10
E3 — Motor Specifications
KV350 rpm/v
Stator Size35.1 mm*10 mm
Slot-Pole Configuration12N14P
Weight120 g ± 1 g
Shaft Diameterф4 mm
Bearing Model604ZZ
Magnet TypeN48SH
Motor Dimensions42.4*27 mm
Idle Current0.35 A
Phase Resistance0.26 Ω
Propeller Specifications5
E3 — Propeller Specifications
Diameter15.5 inch
Pitch5.8 inch
PropellerFolding Propellers
MaterialCarbon-Plastic Composite
Weight26 g ± 0.5 g
In the box

E3 Propulsion System · Package Dimensions: L125 * W82 * H70 mm · Package Weight: 203 g

  • E3 Propulsion System Packaging Box x1
  • E3 Propulsion System x1
  • Heat-shrink Tubing x3
  • Hex Socket Head Cap Screw (M3*6) x4
  • 3.5 mm Connector x3

E3 Propulsion System Fixed-Pitch Properller · Package Dimensions: L220 * W90 mm · Package Weight: 32 g

  • E3 Propulsion System Combo Folding Propeller Packaging Bag x1
  • E3 Foldable Propeller x1
  • Hex Socket Head Cap Screw (M3*6) x2

Item names as listed by SIYI. Contents can vary by combo.

Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website

Where it is used

SIYI has not published a reference configuration that names this model. Products in the Propulsion System line are used in solutions for these platforms.

Downloads — E3

Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.

SIYI download page

View in catalogue: SIYI Product Brochure 2026/09 — page 28

Articles and case studies featuring E3

E8 Heavy-Lift UAV Propulsion SystemNew

Propulsion System

E8

Motor, 80 A FOC ESC and 32 × 12.0-inch folding propeller with 18.5 kg max thrust per axis

  • Max thrust 18.5 kg/axis
  • Recommended take-off 5–8 kg/axis
  • φ40 mm tube, 12–14S LiPo
E6 Integrated Commercial UAV Propulsion System

Propulsion System

E6

Motor, FOC ESC and 24 × 9.0 folding propeller, 12.5 kg max thrust per axis at sea level

  • Max thrust 12.5 kg/axis (sea level)
  • Recommended take-off 3–6 kg/axis
  • Φ30 mm tube, 12–14S LiPo
D6 Multirotor Propulsion System

Propulsion System

D6

Motor and FOC ESC for 22-inch straight or folding propellers, 6.5 kg max thrust per axis

  • Max thrust 6.5 kg/axis
  • Recommended take-off 2–2.5 kg/axis
  • 30 mm tube, 12–14S LiPo
CAN LINK Propulsion Tuning Module

Propulsion System

CAN LINK

Module for upgrading propulsion firmware and tuning ESC parameters from a computer

  • ESC firmware upgrade
  • ESC parameter adjustment
  • Real-time and historical data

Interested in E3?

Send us your requirements for more information, a quotation or advice on choosing a configuration.

Search the site

e.g. ZT30, thermal camera, inspection drone, RTK