
Link & Controller
Ethernet-to-HDMI Converter Module
Converts an RTSP stream from Ethernet to HDMI output, with MAVLink OSD and MP4 recording
- Ethernet RTSP in, Micro-HDMI out
- MAVLink OSD overlay
- MP4 recording, 1080p at 30 fps
Link & Controller · Accessories
Converts HDMI video to an RTSP stream over Ethernet, with 1080p recording to a TF card

The Air Unit Recording HDMI Input Converter turns the HDMI signal from a camera or other source into a standard RTSP video stream on its Ethernet port, so it can feed Ethernet-based video links, including third-party ones. It records 1080p or 720p video at 30 fps to a MicroSD card, runs on 12 V at 3 W, and weighs 26 g.

Takes video through a Mini HDMI input and outputs a standard RTSP stream on the Ethernet port, which third-party Ethernet-based video transmission devices can also use.
Records 1080p (1920×1080) or 720p (1280×720) at 30 fps in H.264 at 12 Mbps, on a MicroSD Class 10 card of up to 32 GB formatted as FAT32.
Measures 42*41*11 mm and weighs 26 g. Runs on 12 V with 3 W power consumption and operates from -10 to 50℃.
The IP address is not fixed and can be changed to suit the network, while the network segment stays the same. The default stream address is rtsp://192.168.144.25:8554/main.264.
| Video Input Signal Interface | Mini HDMI |
|---|---|
| Video Output Signal Interface | Ethernet Port |
| Operating Voltage Range | 12V |
| Power Consumption | 3W |
| TF Card Video Recording Resolution | 1080p(1920×1080)@30 fps 720p(1280×720)@30 fps |
| Video Storage Bitrate | 12 Mbps |
| Supported File System | FAT32 |
| Video File Format | H.264 |
| Supported Storage Card Type | MicroSD class10, up to 32GB |
| Operating Temperature Range | -10~50℃ |
| Product Dimensions | 42*41*11mm |
| Product Weight | 26g |
Specifications are taken from the SIYI website as of 1 October 2026 and may be revised by the manufacturer without notice. View this product on the SIYI website
SIYI has not published a reference configuration that names this model. Products in the Link & Controller line are used in solutions for these platforms.
Files are served by SIYI, as listed on 1 October 2026. Check the SIYI download page for the latest versions.
It supports most HDMI devices, for example SIYI ZT6 and A8 mini, cameras, laptops and tablets.
The stream is pulled over RTSP. The default address is rtsp://192.168.144.25:8554/main.264.
The IP address can be changed by entering the new address in the SERIP.TXT file on the SD card; CURIP.TXT shows the current address. The network segment cannot be changed.
Recording has to be enabled in the SIYI FPV software.
Connect RX+ to the device's RX+ and RX- to its RX-, without crossing them, and make sure 12 V power and ground are connected correctly.
Touchscreen gimbal control relies on SIYI's proprietary network protocol. When the gimbal's video is carried over HDMI, that control path is not available.

Link & Controller
Converts an RTSP stream from Ethernet to HDMI output, with MAVLink OSD and MP4 recording

Link & Controller
10.1-inch 2000-nit ground station with triple-frequency link, dual batteries and air unit

Link & Controller
7-inch 1600-nit ground stations: UniRC 7 (2.4 GHz) and UniRC 7 Pro (2.4 + 5.8 GHz)

Link & Controller
7-inch 1000-nit Android ground station with one link for control, datalink and video
Send us your requirements for more information, a quotation or advice on choosing a configuration.