UniRC 10 Pro Launched: Triple-Frequency Handheld Ground Station
SIYI has released the UniRC 10 Pro, a handheld ground station with a 10.1-inch 2000-nit screen, a triple-frequency link, 27 physical channels and IP54 protection.

SIYI released the UniRC 10 Pro on 19 November 2025. It is a triple-frequency handheld ground station for professional operation of drones, UGVs, USVs and robots and, by SIYI's count, the fourth handheld ground station in its link and controller range.
Key specifications
| Item | Stated value |
|---|---|
| Display | 10.1-inch, 1920 × 1200, 2000 nits with adaptive brightness |
| Link | Triple-frequency; any single band or dual-band combination; adaptive frequency hopping |
| Video | 4K 30 fps decoding; transmission bitrate up to 65 Mbps; AES encryption |
| Controls | 27 customizable physical channels; 4 Hall-sensor joysticks |
| Power | Internal battery plus hot-swappable external battery; PD 65W fast charging while in use |
| System | Android 13; Qualcomm 8-core SoC |
| Protection | IP54 |
| Operating temperature | -20°C to 55°C |
| Ports | RJ45 Ethernet, HDMI, USB-A, Type-C, SIM slot, TF card slot, 3.5 mm audio |
| Data link and SDK | Serial port, Bluetooth, Type-C, UDP |
The launch announcement does not name the 3 frequency bands and gives no transmission range figure.
What is new in the line
Against the rest of SIYI's handheld ground station line, the announcement points to three changes:
- Screen: SIYI states this is the largest and brightest display in its handheld ground station series.
- Link: triple-frequency redundancy, with band, channel and modulation rate adjusted automatically as the radio environment changes.
- Controls: the channel count rises to 27, across 2 main and 2 mini joysticks, knobs, dials, metal 3-position switches, rocker switches and buttons. All 4 joysticks are upgraded to Hall sensors, and the mini joysticks allow two-handed payload control.
Power, cooling and integration
The external battery can be swapped while the unit keeps running and can also charge the internal battery. A built-in centrifugal fan handles cooling; SIYI says the internal temperature typically stays about 10°C above ambient.
The UniRC 10 Pro works with SIYI gimbals, flight controllers and propulsion systems and with products based on MAVLink, such as ArduPilot and PX4. With UniGCS it displays flight controller data, controls gimbals and payloads, shows propulsion telemetry and adjusts link parameters.
SIYI names site inspection, emergency rescue, firefighting and marine surveying as target uses. To set it against other ground stations, use the comparison page.
This article is a summary written from a report published by SIYI. Read the original on the SIYI website


